【天德钰】FP6601QS6协议芯片 A口协议车载充电器移动电源

1.Supports HiSilicon Fast Charging Protocol (FCP).
2.Supports Qualcomm?Quick ChargeTM 2.0/3.0 Class A : 3.6V up to 12V Output Voltage.
3.Automatically Selects FCP and QC2.0/3.0 Protocols.
4.Supports USB DCP Shorting D+ Line to D? Line per USB Battery Charging Specification, Revision 1.2.
5.Complies with Chinese Telecommunication Industry Standard YD/T 1591-2009.
6.Supports USB DCP Applying 2.7V on D+ Lineand 2.7V on D? Line.

189-2458-5723

在线咨询

PDF下载

如需产品PDF资料，请联系在线客服!

PART 2

产品参数

管脚封装：

IC管脚示意图	管脚号	管脚名称	描述
	1	D+	USB D+ data line. Recommended this pin connect without resistors(open) or with a resistor higher than 1MΩ connect to GND
	2	GND	Ground pin
	3	FBO	Feedback output pin. Current sink/source FB node
	4	QC_EN	QC_enable: QC2.0/3.0 and FCP function are enabled by either logic high or high-Z. Contrarily, QC2.0/3.0 and FCP function are disabled by logic low
	5	VDD	Power supply input pin
	6	D-	USB D? data line